皮莫罗尼 NVMe 底座天文摄影用 Raspberry Pi 5 外壳

Pimoroni NVMe Base Raspberry Pi 5 Case for Astrophotography

2024-04-04 22:06:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a case for Raspberry Pi 5 with Pimoroni NVMe Base.

It is a bit different from my other case that supports the NVMe base because it supports a 12V-5V step-down power converter Amazon-Link. I used some hot-glue to keep the converter in place.

The converter then supplies the RPi with power via the GPIO-Pins. Both, original USB and 12V power can be used now.

The bottom part also has two holes for M3 threaded inserts. So you can attach the case to a telescope rail or attach a finder-shoe to it. Please make sure the screws do not touch the NVMe base.

It fits a RPi5 with the official fan and RTC battery. Should also fit with common HATs, but not tested.

Use the printable spacers instead of the spacers coming with the NVMe base since they are a little smaller. Use the screws from the NVMe base to hold the case together.

SD-card slot and power button are accessible but it's all a bit tight.