14毫米逆时针转向 - 14毫米顺时针转向适配器，用于Specna EDGE AK系列步枪

14mmCW - 14mmCCW adapter for Specna EDGE AK's

2024-04-05 02:41:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

14毫米逆时针转向 - 14毫米顺时针转向适配器，用于Specna EDGE AK系列步枪

Summary

This is a thin and weak structure, so it is intended just to mount muzzle devices and flash hiders, low stress accessories like that if it is printed by FDM, resin printed it'll be slightly stronger, but still too weak to hold up to anything that has any leverage like a suppressor. It's a 14mm CW - 14mm CCW thread adapter specifically designed to be the same width as the specna ak's barrel and to perfectly cover the threads so that a mounted muzzle device looks flush with the gun. There isn't a gap for an o-ring but it's 0.3mm short of the thread so that it's possible to just hand tighten it to the thread.
Thanks for looking! Comment any problems if there are any and I'll try to sort them out :)