1.5毫米至22毫米 PVS-14 IRIS可视红外相机盖

1.5~22mm PVS-14 IRIS cap

2024-05-05 00:21:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I couldn't find any solutions for a daytime/ storage cap for my Iris so I made this up to protect my nods. You will need shock chords and ranger bands to secure the bungee as this is the lowest profile way that lets you still articulate your tubes, etc.

you can get the IRIS here:https://97331a.myshopify.com/products/soac-mini

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
Rafts:
No
Supports:
No
Resolution:
.2 or 1.5
Infill:
100%
Filament brand:
elegoo
Filament color:
blk
Filament material:
Rapid PLA +
Notes:
you can use whatever material you want; TPU might work better for these caps, the infill is up to you since it's just a cap, and the resolution is up to you as well; I did add fuzzy skin to mine on the outside for a bit of texture.