网格化处理下的第二代风扇罩模型

Meshify_S2_fan_shroud

2024-04-05 06:31:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A mod of the excellent Meshify S2 bottom plate by fallennae.
This version allows for a 140mm fan to be mounted in the lower position of the front panel, closing the gap with an upward scoop that will direct the airflow toward GPU/CPU and closing the PSU tunnel.

NOTE: The front tab should have a M3 tapped hole to fix using the screws provided with the case (like the default metal plate). I decided to not print the hole, since my printer would never do a good job. Instead, it is best to position the plate then drill the hole in situ. The screw is completely optional, as the part will sit snug even without it.

NOTE2: The fit is tight. With a Silentwing Pro4 there is barely any space left. In fact, mounting the fan requires removing the middle fan as well, inserting the shroud, sliding the bottom fan from the center, lowering it into position, then installing the middle fan.