货架式PVC管线固定装置

Shelf Filament Holder for PVC Pipe

2024-04-05 11:33:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My first design! :) These are brackets for use with 1/2" PVC Pipe (see photo for closeup of pipe details). The combination is put together and placed on a shelf for holding filament spools in an upright position.

There is an End Bracket, Support Brackets, and Connector Bracket.

The End Bracket as its name implies is used on either end. Fit two equal lengths of PVC Pipe into the holes. The same model is used for either end. The holes do not go all all the way through.

The Support Bracket is intended to be used in the middle or wherever the pipe sags beneath the weight of the spools. Instead of holes, there are channels.

Finally, the Connector Bracket has through holes and is used to connect multiple pieces of PVC into one long section.