山羊/精灵族/魔鬼角 - 可拧上或穿过发丝

Goat/Tiefling/Devil Horns - Screw on or loop through hair

2024-04-05 21:15:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are some little horns you can use to put on a hat/headband/headgear or directly in your hair if it is long enough.

HornsHair.stl is a horn with a slot for you to slide your hair through, which allows you to wear the horn directly in your hair (see photo). Slide your hair through the slot using a hair needle/loop tool for hair styling or using a loop of string. You can either tie a hairband or do a braid to keep it in place. May not be suitable for people with fine hair. This requires supports for the slot.

HornScrew.stl is a horn which has threads that allow you to screw it onto fabric. No supports needed.

Base.stl is the same base used in the unicorn horn (https://www.thingiverse.com/thing:6514072) and cat ears (https://www.thingiverse.com/thing:6554892). The holes are to enable you to sew and secure the horn in place which prevents rotation while being worn. No supports needed.