花瓶模式Vixen太阳能导航工具

Vase Mode Vixen Solar Finder

2024-04-05 22:58:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

花瓶模式Vixen太阳能导航工具

花瓶模式Vixen太阳能导航工具

Summary

This solar finder fits a Vixen finder bracket mini dovetail.

It has two modes of operation. The first is centering the spot of light falling on a thin rear screen. The second method is by making self-shadow of the exterior hourglass shape concentric and even.

It is indented to be printed in vase mode, with thick extra thick walls and a thin concentric first layer.

Use a light colored filament to allow the spot of sun light to glow through the thin first layer.

The first layer height should be thin enough to allow light the glow though but thick enough to be strong. A concentric bottom layer fill will give a naturally centered reticule. If the first layer gets damaged or breaks off you could glue on a piece of paper in its place.

Obviously the thin vase wall is fragile, so only use light clamping force on the dovetail bolt

PLA will get soft in fuller summer sun.

Never look at the sun though an unfiltered telescope. DO YOUR RESEARCH!

Print Settings

Rafts:
No
Supports:
No
Notes:
Vase Mode
0.4mm layer height
1.2mm extrusion width
Concentric single bottom layer
30mm/s

If you're using a0.4mm nozzle you may need to go slower to push that much plastic through while ensuring good layer adhesion.

How I Designed This

OnShape

Here's the link.
https://cad.onshape.com/documents/10fc9409adf9263c3ee16565/w/05beb8ca3dc217a3ef04885d/e/b1f2e266d16519d3272b79fb?renderMode=0&uiState=661010171a77917bb3cc78d2

There two parameters for Diameter and Rise for easy modification

Tags

dovetail Eclipse finder solar solar eclipse spiral vase telescope vase vase mode VIXEN

花瓶模式Vixen太阳能导航工具

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型