Coffin candle mold
2024-04-06 02:50:17
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
at least 70% filling due to the stress of the hot wax with PLA. Finished candle can be easily removed. I later drilled the hole for the wick to the appropriate size, but it can be adjusted before printing. It is best to seal the shape with adhesive tape at the seam and the wick,
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Supports:No
- Resolution:3
- Infill:70%
- Filament brand:
jayo
- Filament color:
grey
- Filament material:
PLA
- Notes:
at least 70% filling due to the stress of the hot wax with PLA. Finished candle can be easily removed. I later drilled the hole for the wick to the appropriate size, but it can be adjusted before printing. It is best to seal the shape with adhesive tape at the seam and the wick,
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
黑武士2游戏手柄改装及配件分离2023-08-23 -
Elegoo Phecda 十字光标激光模块与空气辅助管支架2024-04-06 -
TBS源一V5 Matek M10Q 5883 Vifly GPS伴侣SMA安装座2024-04-11 -
巨魔头像 012024-04-21
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Flex Dino钥匙链2023-03-26 -
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23
-
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
罗技K400键盘壁挂式支架2025-07-27 -
泡泡底拖鞋2025-07-17 -
巴黎卢浮宫的三圣母像2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24