太阳镜镜片盖 - 内径3.5英寸

Solar Filter Lens Hood - 3.5in ID

2024-04-06 23:49:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For use with a 4-5" Baader-type solar film.
I dozed this to fit over the objective of my spotting scope, but will fit over anything else that is 3.5" OD or smaller.

I'll upload a protective cover set after building those, but they'll be a piece of cake to make .
Trimmed the film to fit the face of the pieces, used double-sided tape to hold the film in place while assembling, and electrical tape around the outside.

In hindsight, I should have trimmed the film square, left the corner "ears" to fold over the edge, and the electrical tape would have helped to keep the film in place.

Since it's really just the double-sided tape keeping the film in place, I'll likely run some screws through the faces to make for a tighter retention.

4"film is cheaper and would work fine, but it would only have 0.25" of support in the edges.

太阳镜镜片盖 - 内径3.5英寸

朋友，你觉得上面这个模型，属于下面的哪个分类？