Sunlu S9 热端外壳
Sunlu S9 Hotend Cover
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is to cosmetically replace the hotend cover, it uses all original parts
Print Settings
- Printer:
Sunlu S9 plus
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:.16 or .2
- Infill:40
- Filament brand:
Sunlu
- Filament material:
PLA
How I Designed This
I have created a new front for the Sunlu S9 Plus hotend, I just didn't like the look of the original.
This uses all of the original parts except the little washer ring thingy that hold the LED in place. you will have to cable manage. I just tucked them all above the the 40mm fan.
I have printed this in PLA, 3 walls and 40% infill and best of all no supports everything should print great.
2 models have been included one with heat inserts for the rear screws which is the main one I worked on and one for use without heat inserts but I haven't tested that one.
Tags
相关内容
联系我们
热门推荐
-
安捷ET4 Pro升级套装2023-03-31 -
安装电缆固定装置2023-05-09 -
Pixie 40m QRP收发机箱（由OE8GKE制作，带有标签）2024-04-13 -
Enders 3 V2滚筒支架2024-04-16 -
SnapMaker 2.0 350T 清洁夹具与排气托盘2024-04-21
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
鞋带锁2025-07-17 -
艺术雕像（女性）2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16
