Sunlu FilaDryer S2 4宽度芯片套件

Sunlu FilaDryer S2 Kit 4 wide spool

2024-04-01 06:18:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For those who cannot fit a spool with a width of 84 mm. The spools of the same manufacturer of filament (FDPlast) are different. The new 82 mm spools fit and spin, but the old 84 mm spools do not fit. In order not to spoil the dryer by trimming the plastic, I modeled a kit for lifting the rollers. The rollers themselves are covered with heat shrink..So and rattles less, and the spools does not touch anything. Then I will make a cut sleeve of plastic on the guides.

Because of the complex shape of the dryer had to make left and right inserts. The spacers are modeled to prevent the guides from falling out.