9毫米装填块

9mm reloading block

2024-04-07 01:59:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

i wasn't satisfied with any reloading block. the number they held was to small or not big enough. my current one is 80 casings (yes it bugged me :) ) and my current one the casings sit to deep and are hard to get out while wearing gloves. All other ones i could find only held 50 casings. i wanted one that held 100 casings. 10 rows with 10 each.
100 is what my ammo boxes hold and i wanted a reloading block that held the same.

any suggests or comments on how to make it better please let me know :)
in 1 of the pics i have a casing sitting on top to show you how deep they sit in the block.

there are 2 files. 1 file is just the block. the 2nd files has 9mm inset into the front of the block. other than the 9mm inset into the front they are the same reloading block. the 9mm is only inset 1mm deep. not sure if youll need to use supports or not to print that decal.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.2
Infill:
15%
Filament brand:
Overture
Filament material:
pla
Notes:
**the purple block in the picture was printed with PETG. normally i print with PLA and this would probably print better with PLA. my printer does ok with PETG and i was just trying to use up the rest of my PETG. you'll notice imperfections in the print. thats only because my printer doesn't do PETG the greatest. PLA would have printed perfect.