参数化的Evenflo儿童玩具场地墙壁支架

Parametric Evenflo Play Space Wall Brackets

2024-04-07 07:30:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Design is for this play space baby gate (baby jail) thingy: https://www.amazon.com/Evenflo-Versatile-Play-Space-Cool/dp/B072LTSWND

This Parametric (adjustable) design includes all 4 mounting brackets required to mount the Evenflo Play Space to both the left and right walls. This design was made for people who have baseboards! The other design on Thingiverse does not work if you have base trim along the floor, and it only had brackets for one side of the gate.

Also, you do NOT need to put screws into your baseboards! With only the top screws installed, they are pretty sturdy as is. I just left the extra screw holes in the bottom area in case you choose to reinforce it more. Feel free to chop those side-wings off in the slicer, but personally I do think it adds a bit more strength even if you don't screw those in. If those wings get in the way, use your slicer to mirror the part so the wing is on the opposite side.

This Fusion360 design is parametric, meaning you can type in the height and width of your baseboards in the "Parameters" window in Fusion360 and the design will automatically update to fit your baseboards. You should not need to adjust any other Parameter values, since I did lots of test prints to find the right dimensions for everything.

NO SUPPORTS NEEDED! I made flat spots on one side so they can be printed without supports. The tubular part (top_left) is meant to be printed standing up for best strength. again, no supports needed on this model. I have a screenshot of my build plate for reference on print orientation.

I printed these brackets first with PLA (15%infil, 3 walls) and they are very strong. I am printing them again in PETG (only because I wanted them to be white) and I suspect PETG will work just fine too.

I worked really hard on this to make it work for anybody with different size baseboards, and this is my first time making a parametric model in F360 so if this design helped you, please consider posting a Make or donating (: