可定制且参数化的干粮勺子

Customisable & parametrised dry food scoop

2024-04-29 16:16:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Scoop designed to measure out dry dog food.

Wall thickness is 3mm, height 71mm and length/width of 75mm. Infill of 10% seems to do the trick. Volume is 300ml, which is embossed into the bottom of the scoop.

I've include the f3d file so you can customise size and text to your hearts content! Parameters are set for the wall thickness, depth and side lengths. You will have to calculate the volume changes. Measured the bottom face area and multiply by the wall depth, which you can easily do via the measure option (I).

Should not require supports.

Please be aware there is some considerations if your prints come into contact with food. I'll let you do your own research and make your own call, but I would recommend following basic safe practices. A good starting point would be here:https://all3dp.com/2/pla-food-safe-3d-printer-filament-abs/