我的自行车支架V2 - 使用Fusion 360 f3d文件
Hold my beer V2 - bike mount - with fusion 360 f3d files
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I present to you the support to ride a bike and drink your can of beer quietly. (With moderation of course!)
The section on the side is fine to adapt to the diameter of your can: a standard size can of + - 66 mm in diameter.
At the level of the bike attachment, you need two good colsons. I recommend to tighten them well. Measure the diameter of your handlebars, 4 cm: it's perfect!
Less, you can use one of the adaptators
To print, these are the standard options with a support. (The tree support uses less plastic)
Leave me your opinions!
Feel free to customise your part and share your makes !!! :D
Tags
License
Hold my beer V2 - bike mount - with fusion 360 f3d files
by ludoludoludoludoludo is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Voxelab Aquila可连接床手柄2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
巨魔头像 012024-04-21 -
可调节臀部垫（适用于HW97K）2024-05-06 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最新模型
-
用于加长杆的戴森配件支架2025-07-17 -
比基尼模型2025-07-16 -
天使和恶魔2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16
