Raspberry Pi 模块化箱体 - 第一设计

Rasperry Pi Modular Enclosure - 1st design

2024-04-08 02:59:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an attempt at a modular enclosure system for the Raspberry Pi microcomputer or similar. Mounts included for the official Raspberry Pi screen. It was my first attempt at designing the enclosure but it the parts did successfully print and assemble.

The idea for a 3D printable case of this design was conceived whilst modifying standard plastic food containers for use in DIY raspberry pi project. The aim is to have a enclosure system that enables integration of diverse parts in one case.

The case is not currently watertight so suitable for dry conditions only.

This case is 270x190x84.4mm in size and contains an internal cage of 236x152x65mm to which a raspberry and other component can be attached. The method of attaching the components is at the choice of the user. Either 4 of the supports should be printed or alternatively use plastic bolts to act as spacers.

M4 and M6 plastic bolts are required for assembly.

A earlier version has been successfully 3D printed but I have not tested as do not have a 3D printer. Therefore caveat emptor. If nothing else it could be scenery for table top gaming :)

Print Settings

Printer:
I do not own a printer
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
I do not own a printer but it was successfully printed by a commericial 3D printining company.

Post-Printing

How I Designed This

This project was inspired by using plastic food boxes to create an enclosure for a raspberry pi project. It took a look time to make the enclosure and I figured it would be good to make something to 3D print to save people time on their projects.