未来感十足的R!SE手机模型

R!SE Phone

2024-04-08 18:03:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

R!SE phone is a sleek and minimalist phone stand.

*Design & Construction**
The R!SE phone essentially comprises a contour guided along an almost sinusoidal wave, resulting in a design that is both simple and captivating. This unique appearance seamlessly blends into your environment, offering not only aesthetic appeal but also stability, thanks to the intriguing wave pattern.

If the stand doesn't perfectly match your phone size, we recommend a straightforward solution: adjust the dimensions by scaling it, ideally directly within your slicer!

Slicing, Printing
For optimal results, I recommend slicing and printing the R!SE phone as a spiral vase, especially when using transparent materials, with zero bottom and top layers to keep the sides open. In my personal experience, I've used a 0.8mm nozzle, but it's not strictly necessary. If you're working with a 0.4mm nozzle, consider increasing the extrusion width and layer height to the maximum. Turn off your cooling fan to prevent warping. Typically, an extrusion width of 1.8 to 1.9 times the nozzle diameter and a layer height of 0.9 times the nozzle diameter work well. However, these settings may vary based on your printer setup, filament, and cooling, so a bit of experimentation might be needed for your specific slice. When printed following these guidelines, the stand remains stable and durable.

Assembly
Assembling the R!SE phone is a breeze—simply remove it from the build plate, discard the brim, and it's ready for use!

Happy printing!