停止门闩

STOP !T Doorstop

2024-04-08 18:47:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

STOP !T is a very simple and plain doorstop for doors with an automatic door closer. It actually uses the automatic door closer to keep the door open without scratching the floor, entangling with the carpet, accidentally getting kicked away… Just open the door, slide it in the automatic door closers slot and softly release the door. It will rest against STOP !T and remain open… When unused just place it on top of the automatic door opener, so it is always at hand when needed. Used mine for years now and would not want to miss it!

Design
It is really just a plain and simple slab that widens a bit towards the middle to provide a good grip. Nothing more, nothing less.

Construction
All rounded corners are clipped to 35° in order to avoid any supports and the rest is just a plain… I already mentioned that ;)

In case your automatic door closers gap has slightly different dimension you can easily and quickly scale the width and length of the part directly in you slicer, no CAD required.

Slicing, Printing
It prints completely with standard settings, really nothing special, 2 perimeters, 4 bottom / 5 top layers, 15% infill, laying flat on one side, no brim. The only thing you might want to change, if you are slicing yourself and had to rotate the part to fit on your print bed, is the infill orientation so the bottom and top layer are running along/parallel the long side of the part (already done in the provided GCODE and 3MF files).

Assembly
Sorry, but there is actually not much to assemble.

Happy printing & KEEP THE DOOR OPEN!