PS5 Dualsense旅行携带盒

PS5 Dualsense Travel Case

2024-04-09 08:09:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a travel case designed to fit a PS5 Dualsense Controller. The outer shell pieces and hinge can be printed out of any plastic of your choice. The inner case parts and plugs should be printed in TPU or other flexible filament options (I used 7% infill and reduced top and bottom shell thicknesses to achieve my preferred part 'squishyness'). I have not tested with PLA or any other rigid plastic for the inner parts, so it may work but attempt at your own risk. The case was designed with an internal cavity to store a somewhat tightly coiled charging cable along with the controller. This design utilizes 4 magnets (1/2"d x 1/8"t), one in each of the circular holes which is then glued in with a plug to reduce the strength of the magnets when shut (It was very hard to open without them). All additional detailing seen in the included photos (PS logo and lettering) are from negative parts used in Bambu Slicer, The face button symbols on the back are modeled in.

You will need:

1x Outer Case Top
1x Outer Case Bottom
1x Inner Case Top
1x Inner Case Bottom (Custom version allows for some extra clearance behind the main controller, in my case, for some aftermarket back buttons)
1x Hinge Pin
4x Magnet Plugs
Some adhesive to hold the pin, magnets, and plugs in place. As well as to hold the inner case pieces to the outer case pieces. I just used super glue.
NO hardware required, everything is printable.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
No
Resolution:
Prefence
Infill:
7%
Filament brand:
Inland
Filament color:
Gray, Purple, Yellow
Filament material:
PLA, TPU
Notes:
The outer case pieces and hinge pin are printed from PLA, though they could be any rigid plastic.
The inner case pieces and magnet plugs should be printed from TPU or another soft filament.
I was able to print this without support on my Bambu Labs P1S. If you reduce the number of top layers you may run into issues with surface finish, but I found it useful anyway for creating a more compliant part.

How I Designed This

Special Thanks:

Thanks to @Kabliga on Printables for posting the only (free) dimensionally accurate PS5 controller scan on the internet it seems. I used a low-poly version of his scan to get a start on shaping the inner cavity, here is a link to the original:
https://www.printables.com/model/407609