训练手枪
Training handgun
2024-04-10 17:34:42
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A few designs for training, costumes or airsoft accessory. With undermount light design and with light and optic design. Print with supports, glue two pieces together for cleanest look. Printing in PLA filament in full mode is tough as it always comes out with some rough angles.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO NEPTUNE 4 Max
- Rafts:No
- Supports:Yes
- Infill:%20
- Notes:
Use traditional supports and leave supports inside of light for durability. Printing at 20% infill seems a great setting for speed and durability. Glue pieces with any good colle cyanoacrylate glue (CEC Corp. is a good on Amazon) then clamp together for best results while drying.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
智能模块化fnx 45号组件2023-03-26 -
刀剑守卫：Zenitsu2023-05-13 -
Raspberry Pi 保护外壳2023-05-14 -
汤姆森GO5200进入空气导管2024-03-25 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04
最热下载
-
可定制像素珠子照片面板2023-03-26 -
E3D火山喷嘴2023-05-26 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Dado - 立方体模型2024-03-24 -
Apple鼠标 - M0100 3D模型2024-03-25
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
模块化笔筒链2025-07-19 -
鞋撑2025-07-17 -
兔女郎半身像2025-07-15
