苗条的钱包
The slim wallet
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfanSummary
this wallet is a remix of penlands design.
holds 2 id cards plus 7 cards in the main compartment
Print in place wallet I designed. Holds up to 9 cards inside, requires no supports and prints standing up.
On the top side there is a locking mechanism, down is lock, up is unlock.
On the bottom, there is a lever you push to make the cards come out.
After finishing printing, remove the built in support from the locking mechanism on the top side. Next, push the leaver at the bottom through the hole to help it get unstuck.
This model requires high tolerances
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Pro
- Rafts:No
- Supports:No
- Resolution:.12
- Infill:10%
- Notes:
printed on highest resolution setting and 10% infil. everything else was default.
Post-Printing
prep to use
just use a utility knife to pry the sides of the body away from the lever a little bit and to separate the lock from the lock stop.
How I Designed This
remixed from penland
i liked penlands design and print process but needed more storage and easy ID card access.
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
压缩袋真空适配器2023-03-27 -
Raspberry Pi外壳2023-03-27 -
Dew Shield for Evoguide 50ED2023-08-07 -
Schildkröte Line Tank2023-08-08 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09
最热下载
-
GPD Win3 把手型号2023-04-07 -
佳能EOS镜头连接接口2024-01-11 -
硫化机模型2024-04-13 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
弹弓HGX-FRAME V1A2025-07-18 -
艺术雕像（女性）2025-07-16 -
天使和恶魔2025-07-16 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15