水培大型植物套装——'疼痛桶'

Hydroponic set for large plants - "Pain Bucket"

2024-04-11 09:45:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Overview

Introducing the Pain Bucket, an innovative hydroponic set designed for the cultivation of large plants, including but not limited to extremely hot peppers like Trinidad Scorpion, small citrus trees such as lemons and oranges. This setup is a creative variation of the Dutch bucket system, optimized for those who wish to integrate large, decorative flowerpots into a fully autonomous hydroponic solution.

Main Advantages

Decorative Integration: Transforms large decorative flowerpots into autonomous hydroponic pots, blending aesthetics with functionality.
High Capacity: Holds over 35 liters of nutrient solution in a compact design, maximizing space efficiency.
Optimal Oxygenation: Ensures excellent oxygenation with a tested oxygen level of about 8 mg/l, which is ideal for healthy root breathing.
Electricity-Free Operation: Capable of operating without electricity for a period, maintaining a 30% nutrient solution level for emergency sustenance. Manual watering is also an option.
Quiet Operation: Designed for quietness, making it suitable for indoor environments, including bedrooms.

Assembly Instructions

What You'll Need:

Neutral clay pebbles (e.g., Plagron Europebbles) for the inner pot
30-35 liters of nutrient solution
Electricity for the pump
Additional light source (if necessary)

Non-Printed Parts:

Opaque silicon tube (5 mm inner diameter) for connecting the pump to the solution diffusor.
Simple water pump capable of lifting water to a height of 1-1.2 meters.
Any tube (15 mm diameter) for noise-reducing water flow from the inner to the lower pot.
A suitable pot with a large lower tank (30-40 liters) and an inner tank (6-10 liters).

Assembly Steps:

Drill 32 mm holes at the bottom of the inner pot for the extendable emergency tube, preventing overflow due to root blockages. Consider adding a filter to catch debris.
Drill a 32 mm hole on the side wall of the inner pot for the corner tube, ensuring its bottom is about 10 mm above the inner pot's base. Combine the tube connector with a 90-degree nut to form a solid piece, then attach the corner tube.
Connect one end of your 5 mm opaque tube to the pump, and the other end to the solution diffusor.

Your Pain Bucket hydroponic set is now assembled and ready for planting. Just fill the inner pot with clay pebbles, add your nutrient solution to the lower tank, and ensure your pump and optional light source are powered.