压缩机过滤器固定支架
Filter mounting bracket for compressor
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The Vevor or Yong Heng high pressure compressor, with water cooling, has an impurities filter at the end of the high pressure hose. The compressor has no storage compartment for this filter. Thus the filter just meaders around, even when moving it. So I created a little storage compartment that can be mounted on the left or right side of the compressor. It uses 2 existing bolts. If needed you can adjust the distance between the 2 used bolts. The bolts are long enough to include the bracket.
The 2 bolts must be tightened again, therefore I use 100% infill.
Print Settings
- Printer:
MyDiy3dPrinter
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:100%
- Filament brand:
Jayo
- Filament color:
Gray
- Filament material:
PETG
- Notes:
The 2 bolts must be tightened again, therefore 100% infill.
Tags
相关内容
联系我们
热门推荐
-
TBS Source One v3 - 英雄形象支撑架构2023-05-13 -
大众汽车 Beetle 车辆座椅背靠调节旋钮 KKF 171.881.6712024-01-17 -
俄亥俄州北部大学墙面/桌面装饰标识2024-03-21 -
Hernkyn先锋代表 - 木乃伊探险者（由TheExoticGreeble制作）2024-03-21 -
生存者旋转三角形谜题32024-03-30
最热下载
-
怪兽大战：1998版2023-03-26 -
Hein Gericke Hiprotec 快拍2024-04-03 -
18650电池存储盒2024-04-18 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
原神优菈2025-06-27
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
鞋撑2025-07-17 -
天使和恶魔2025-07-16 -
一体打印行星齿轮2025-07-15
