齿轮之心：单件3D模型带动力部件，节日惊喜礼物

Geared Heart -Single Print with Moving Parts - Last Minute Gift

2023-03-26 19:55:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Tips are now now graciously accepted. (and might just lure me back to doing 3D work again)

If you print it, please consider posting your Make a small token of gratitude. (or if you print a bunch how about a tip?) https://www.thingiverse.com/urbanatwork/about#tip

I've been looking at a necklace version... but my real job has been busy busy.

Quick note: I found a very small deformation on the axle of one of the models uploaded. I should be able to add it to the next tweak. Thanks for posting all the Makes and positive feedback!

UPDATE (2015-06-02) : I added a new version of the large gap model that was causing some printers to print usual bridging at the top layer of the model. If your printer isn't perfectly dialed in or this is your first try at printing this model then use this version first: http://www.thingiverse.com/download:1366134

UPDATE (2015-02-08) : I added a "new" version that has a larger gap around the axles to try and address the issue some are having (including me) with the first layers fusing (especially with PLA). Let me know how it works, thanks.

UPDATE (2015-02-05) : I added a version (GearedHeartV1_5-wGearHoles.stl) that has holes in the gears and axels ... as requested by a couple users (to make it easier to turn with a pencil tip or paperclip).

注意：请确保你有足够的纸张和工具准备进行打印操作。如有任何问题，请联系技术支持团队。

I've been looking at a necklace version... but my real job has been busy busy.

快速提示：如果你在打印过程中遇到困难，建议先查看用户手册或在线资源。如果问题依然存在，请联系技术支持中心。

温馨提示：请勿将打印机用于非法用途。如有任何违规行为，将被追究法律责任。

n齿轮之心：单件3D模型带动力部件，节日惊喜礼物

朋友，你觉得上面这个模型，属于下面的哪个分类？