Ender三号gantry球头挂钩

Ender 3 Gantry ball mount braket

2024-04-13 23:34:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a hybrid of Ender 3 X Gantry Cover w/ Camera Mounting Arm by UnknownVar and Raspberry Pi Camera V2 Mount for Ender 3 v2 by crsn00. I cut and trimmed the gantry mount, then took the ball mount from the PI camera kit and incorporated it into the design.

The PI camera kit was my initial print, but I found it blocked the home switch for the X-axis.

I'm new at Blender, so I didn't know how to manifold it properly (I made new vertices and faces instead of blocks). I ran it through the Formware STL Fixer, and it cleaned up my manifold mistakes.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
No
Supports:
Yes
Resolution:
Standard 0.2mm
Infill:
25%
Filament brand:
FIROS
Filament color:
Black
Filament material:
PETG
Notes:
As this needs to support mounting screws for the gantry axis motor, I beefed up the walls to 3.2mm and top/bottom to 1.6mm. This creates solid supports for the portion that mounts to the gantry, and the camera mount is at a 25% infill. I do recommend supports, at least for the base (90-degree overhangs).

Printed at 220-degrees C printhead, 65-degrees C bed.