耳机支架带夹子用于头戴麦克风

Headphone Mount with clip for Headset Mic

2024-04-14 01:31:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I saw this and thought it would be perfect if it had a clip for the microphone for my Razer Kraken V3 headset as I sometimes use the headset without the microphone and tend to lose it, so I decided to try to add a clip myself! I've had my 3d printer for 3 days so I don't have a lot of experience with creating 3d models so it's not perfect but I'm quite happy with it, it's a snug fit so it's easy to remove but is also securely attached to the mount! This should work for any headset with a detachable microphone which has a wire around 16mm in circumference (I'd recommend checking this by wrapping a piece of scrap paper around the wire, marking where the paper overlaps then unwrapping it and measuring that).

This is my first design so hopefully it prints properly, please let me know if there's any issues and I'll try to fix it!