普罗贝因电缆管道端口插头

Propain Cable Housing Port Plugs

2024-04-14 01:46:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These housing port plugs are used for the Propain Hugene2 mountain bike. I don't know if they will fit the Tyee or the Hugene 1st gen, but you can give it ago. I included the SolidWorks CAD files so you can make modifications as you feel necessary. I did design a separate plug for the chainstays, but the downtube plug fit just fine. Note: you'll have to remove the chainstay guard to plug the port closest to the drive side crank arm.

I just made a minor adjustment to the "Housing Port Plugs - Headtube2" version of the plug for the headtube port. the file "Housing Port Plugs - Headtube3" may fit slightly better than the previous version. I haven't printed this one yet, but if you do, let me know what you think.

Check the print speed of the TPU you are using. There are some faster printing TPU's that are 60+mm/s. The Overture 3d brand I used is rated between 20-40mm/s. I also prefer the Gyroid infill because of it's strength in all directions. Note, I did apply a 6 line brim to help with adhesion to the bed.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
Fine
Infill:
30%
Filament brand:
Overture 3D
Filament color:
Black
Filament material:
TPU Thermoplastic Polyurethane
Notes:
Check the print speed of the TPU you are using. There are some faster printing TPU's that are 60+mm/s. The Overture 3d brand I used is rated between 20-40mm/s. I also prefer the Gyroid infill because of it's strength in all directions. Note, I did apply a 6 line brim to help with adhesion to the bed.

Post-Printing

Take a set of wire cutters and snip off the support material. If you are lucky, you can give the brim material a tug and it will cleanly peal off, otherwise use the wire cutters and snip around the oval portion of the plug.

普罗贝因电缆管道端口插头

朋友，你觉得上面这个模型，属于下面的哪个分类？