3D打印机简便式带紧装置

3D Printer Simple Belt Tensioner

2024-04-14 04:12:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple design for holding a wheel bearing at the end of an axle to tension a belt.

This design was replicated from the supplied acrylic part that came with a Zonestar Z5M2 that broke.

Has a single hole for bearing to be attached to at the end, two holes for tnuts to be bolted to, which the two nuts stabilise position in metal frame, and adjusts belt tension by sliding up and down and tighten again.

Replacement parts required for tensioning Zonestar Z5M2.
1x 25mm M4 bolt
2x 10mm M4 bolts
2x 20mm washers
2x 10mm washers
1x M4 nut
2x 5mm Outer, 4mm inner washers
2x Tnuts
1x 5mm plastic spacer
1x 10mm by 5mm wheel bearing

Print Settings

Printer brand:
Zonestar
Printer:
Z5M2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
40%
Filament brand:
N/A
Filament material:
PLA

License

CC BY

3D Printer Simple Belt Tensioner
by samiby is licensed under the Creative Commons - Attribution license.

3D打印机简便式带紧装置

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型