Snapmaker艺术家建造平台存储

Snapmaker Artisan Build Platform Storage

2024-04-14 09:48:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed someplace to store my not-in-use Snapmaker Artisan build platforms, so I designed this bracket and clip system.

The bracket has mounting holes spaced 11 inches apart to match the M6 threaded holes in the side of my steel workbench, but I've included a STEP file so you can modify the spacing and size of the mounting holes (or anything else) if needed. The bracket itself can be printed with most any rigid or semi-rigid filament; I used Elegoo Rapid PLA+. If you need two brackets side-by-side, I'd recommend using your slicer to create a mirror image for one of them, as I did.

The clip is optional. I included it because the vibration my workbench undergoes while the Artisan is in action causes the platforms to "walk" themselves out of the bracket otherwise. The clip should be printed using a filament with some amount of flex, such as PETG; I actually used PETG for the clip in my make. It attaches to the ear in the side of the bracket using an M3x16mm flat head machine screw. The clips for complementary brackets can be printed without mirroring.

Print Settings

Printer brand:
Snapmaker
Printer:
Artisan
Rafts:
No
Supports:
Yes
Resolution:
0.3mm layers
Infill:
30%
Filament brand:
Elegoo (bracket) and M3D (clip)
Filament color:
Gray
Filament material:
Rapid PLA+ and ABSR, respectively.
Notes:
Supports are only needed for the ear on the side of the bracket and gap between the hinge loops on the clip.