SCX24 - Injora LCG底盘后支架/ESC及电池托盘更换
SCX24 - Injora LCG chassis rear bracket/ESC and battery tray replacement
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Rear bracket replacement for Injora's LCG chassis* that allows to mount a small battery very low in the chassis and it has room for ESC and receiver aswell.
Its designed to work with the Furitek Stellar transmissions with forward mounted motors (i suspect most forward mounted aftermarket transmission should fit aswell).
There are 2 versions, each with a stl and step file.The short version is made to fit a Furitec Pro ESC and a Radiolink R4FGM receiver while the long version has no seperations to fit whatever ESC/Receiver combo you're running.
Also added Fusion 360 file in case anyone wants to change something.
*Injora has 2 LCG chassis, this is the one for C10, Wrangler JLU, Deadbolt, Betty and Bronco.
https://www.injora.com/products/injora-lcg-carbon-fiber-chassis-frame-kit-for-scx24-c10-jlu-deadbolt-b17-bronco
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu P1S
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:Gyroid 15%
- Filament brand:
Sunlu
- Filament color:
Black
- Filament material:
PLA+
- Notes:
Printed standing upwards on its flat side where the battery is
Tags
相关内容
猜你喜欢
联系我们
最新模型
-
改进型紧急停车系统AMC-AASD15A2024-05-08
-
魔杖2024-05-06
-
鲸鱼玻璃钥匙扣2024-05-06
-
桌面夹板厚度2mm2024-05-06
-
Shift Collar Boot Support - 可调节领口靴子支撑2024-05-06
最热下载
-
参数化的两部分模具生成器(用于OpenSCAD)2023-03-26
-
Dado - 立方体模型2024-03-24
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
-
塑料扣(3D打印无需支撑设计)2024-05-08
-
Enders 3版控制面板2024-05-08