万智牌指挥官套牌支架——净化网格与盖子的重制版

MTG - Commander Deck Holder with cleaned mesh and Lid (remix)

2024-04-14 21:44:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the MTG Commander Deck Holder by samuelr04 ( https://www.thingiverse.com/thing:4832611/files )

The original left of a corner of the first layer and added it on top (the left one on picture 3 is the original file and the right one is the cleaned up file). I also added some supports on the back of the holder, because the tips break easily. And i created a fitting lid for the Holder.

I forgot to rotate the lid, so rotate it for Printing. It's a little fiddly to put the lid on the holder, but it fits pretty good. It may show some errors in the Thingiverese preview, but at least in cura there are no problems with it.

I only uploaded one clip, so you have to multiply and mirror it for the other side.

I printed the Holder with a 0.4 Nozzle at .2 mm layer height and the clips and the lid with a 0.6 nozzle at .28 mm layer height and it fits good, so you should be fine with whatever height you want to use