共和国指挥官DC-17M 拉格枪（配有狙击器附件）

Republic Commando DC-17M Blaster (with Sniper Attachment)

2024-04-05 07:14:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello there,
a while ago I found out that there arent a lot of DC-17M Blasters around here. So I made a modular one. It requires 14 round magnets (8mm diameter; 2mm height (3 should work too).
Note: 2 are to fill the two holes in the "Middle", I will work on the corresponding rod to connect to the Snipershaft soon)
For the sniper attachment you will need 2x 26cm Rods, 6mm in diameter (I recommend Wood since it is the cheapest)
For the trigger I made room for a viarety of springs, I used a 1cm x 5 mm (diameter) spring. The trigger is a little bouncy but it works just fine.

All "S_" labled parts are for the Sniper attachment
The Granate launcher does not yet exist.

IMPORTANT:
The Model is made for Left-Handed users, to change this all you need to do is mirror the "Middle", the rest is symmetrical

Feel free to reach out for questions and happy Printing
For the Republic

-Stitch