waving lucky cat remix with moving arm
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfanSummary
I bisected Animatrolog's waving lucky cat (https://www.thingiverse.com/thing:2122202) so that the arm can wave.
It uses a standard skateboard wheel cartridge bearing and an elastic to give it some wavy movement.
I'm planning on remixing it again to use a microcontroller and micro servo so the movement could be programmable.
Print Settings
- Printer brand:
TEVO
- Printer:
Tarantula Pro
- Rafts:No
- Supports:Yes
- Resolution:0.2mm
- Infill:20%
- Filament brand:
Inland
- Filament color:
Matte Pink
- Filament material:
PLA
- Notes:
If you don't want to do much sanding/finishing work, then maybe print the body at 1% larger and the arm at 1% smaller in order to use a standard skateboard cartridge bearing.
You can see in this initial print that the bearing fit was a little too tight and caused some cracking.
Tags
联系我们
热门推荐
-
二十一号3D模型2023-03-26 -
摇杆开关固定架 - 丰田RAV4 1994-2000 (XA10)2024-01-09 -
Playmobil 保时捷警察卡车挂钩2024-04-03 -
Daisy小雏菊开花装饰2025-06-26 -
高风险移动球门VEX2024-05-03
最热下载
-
Flex Dino钥匙链2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
Dado - 立方体模型2024-03-24 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
沙箱建筑模型2024-05-08
最新模型
-
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
弹弓HGX-FRAME V1A2025-07-18 -
高跟鞋鞋架2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16
