Qidi X-Max 3 滤料盘挂钩模块

Qidi X-Max 3 filament spool mount Mod

2024-04-15 22:16:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Since the filament holder and also the space for the drying chamber is on the back of this very heavy machine, I designed a quick mod to get everything to the side/front.

I recomend using an additional PTFE tube, to bridge the gap between the drying chamber and the runout sensor. The one coming with the printer might be way to short for that.

You´ll also need additional 4xM3 thread inserts, 4xM3 (>13mm) screws to relocate the runout sensor and probably 3 rawlplugs and 3x 4x30 or 4x40 woodscrews to mount the filament spool mount.

You need to print the wall mount and the runout sensor holder each once.

Unscrew the runout sensor at the back of the device and use the original 4 screws to mount the printed holder back to the device after inserting the thread inserts.
Pull some more wire from the runout sensor out of the machine, it should be long enough (if not shure open the back plate and look for it as you pull). Screw the runout sensor to the mount, with the input facing to the side of the printer.

Drill 3 holes into your wall/shelf, using the printed filament wall mount as template.
Mount the spool holder with 3 screws on the wall/shelf and insert the original spool holder. Fit the drying chamber in place and secure it with the original cap, just like you would do originally on the printers back.

Connect the drying chamber and the runout sensor with the PTFE tube in an adequate length for a proper dust free filament guidance.

In conclusion it is pretty self explanatory, but you´ll need some additional screwing stuff.

Ask for questions :)