Qidi X Max 3循环过滤系统

Qidi X Max 3 Recirculation Filtration system

2024-04-23 12:17:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Carbon and HEPA Recirculation filtration system for Qidi X Max 3.

This uses either the stock 80mm X 80mm X 25mm exhaust fan, or you can purchase an aftermarket 80mm X 80mm X 38mm pressure fan. Either will work but you will get a faster recirculation with the larger more powerful fan.

Parts list:

Filters
https://a.co/d/amsWOR2

38mm Fans
https://a.co/d/71vmE3p

Hardware:

Enclosure to Filter housing
2X #8 x 3/4" or 4mm x 20mm sheet metal screws

Filter housing to fan
4X #8 x3/8" or 4mm x 10mm sheet metal screws

Fan to exhaust duct
4X M4x12mm hex head w/ nuts

Print Settings

Printer brand:
QIDI
Printer:
Max 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
5% gyroid
Filament brand:
Polymaker
Filament color:
Black
Filament material:
ASA
Notes:
Recommend printing in ASA or other heat resistant material.

Supports needed for the exhaust duct and maybe for the 38mm filter housing.

Post-Printing

Post processing:

Sand the mating flanges flush.

Make sure the fasteners screw into all the holes, if they're too tight you can drill them out to be larger or you can heat the fastener with a soldering iron an drive the screw in while its semi hot to form the threads. The holes on the fan may need to be opened up if using the #8 screw but shouldn't need it if using an M4 screw.

Make sure the filter fits snug

Make sure the filter housing fits around the bosses on the enclose

The enclosure holes will need to be drilled out to a larger size to let the screw through.

The XM3 enclosure is covered in large orifices to leak air from, its recommended to cover or plug them in any way you feel.

Disclaimer

I am not a fluid dynamicist, fluid paths were designed with the principle of "looks good". If someone want to remix this to add some vanes, or change the shape of the system to make it more efficient please feel free.