花盆植物水管连接器

Pot plant water connector

2024-04-15 22:30:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Build an aquaponics system using normal plant pots using this pot water collector.

The small water collector (25cm) can take pots up to 25cm diameter. The collector catches all the water draining through the bottom of the pot and channels it to the pipe connector fittings. The extra printed 15mm fittings can be used to connect 15mm diameter irrigation piping. The collectors can be fitted in series using the 8cm printed pipe or irrigation piping, the one end can be closed with the stopper. The collector can be placed on shelves or be hung on steel bars of up to 16mm diameter.

The Large water collector take pots up to 45cm diameter. The extra printed fittings for 25mm pipes can be glued in place to connect to the return pipes. Several of these collectors can be connected in series. The collectors can be connected to 25mm irrigation piping, to one another with a 12cm printed pipe or one end can be closed with the stopper. The collectors can be placed on shelves or be hung on up to 20mm diameter steel or other sufficiently strong bars.