FPV监视器支架 Radiomaster TX16S

FPV Monitor holder Radiomaster TX16S

2024-04-16 09:04:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Features:

additional bolts and a slot for a cable tie to secure extra equipment
quick-release mechanism from the radio control handle
adjustable distance between brackets for mounting on different transmitters
ability to set and lock the angle of the monitor.

Assembly Components:

2 x bolts M3x10
2 x bolts, M3x16
2 x washers (3 mm)
4 x nuts with nylon locks (3 mm)
Optionally installed: 4 threaded insert bushings (M3x5x5) and 4 bolts M3x10 for mounting additional equipment.

In the CAD system, the holes are set to 3.2mm. For printers with a higher flow, this may result in a tight fit for the bolts. Sagging bridges or remnants of supports (if used) may cause the locking nuts to fit tightly. A 12mm bolt from a camera is used to secure the monitor.

Keep in mind. The corner part and the arm part must be mirrored.

Join the modeling effort. The project includes the original FreeCAD source files - I would appreciate any enhancements to the model or suggestions for improvements and the introduction of new features.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament brand:
noname
Filament color:
Pure Black
Filament material:
PETG
Notes:
Configurations applied:
- number of walls - 4,
- top and bottom layers - 5
These settings may be excessive, and it could be possible to achieve satisfactory results with fewer layers. The models printed in PETG are sufficiently flexible and reliable, which makes them a preferable choice for practical applications.

Additionally, attempts were made to print with eSun ABS+, which produced aesthetically pleasing results. However, there are some concerns regarding the flexibility needed compared to PETG, which might affect the functionality of the printed models.