另一个纤维材料存储装置

Another Filament Spool Storage

2023-03-26 20:16:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Yet another filament spool storage box but i wanted to make something that is customizable to different sizes of spools since I purchase my filaments from many different suppliers. This was designed in Fusion 360, so unfortunately it is not compatible with the thingiverse customizer which is based on openscad. However i have included the fusion 360 files here. If you import them into Fusion 360, you may customize it by changing the parameters menu. Almost all the measurements in this designed is based on parameters, so changing the numbers below will automatically update across the model.

Key parameters to look out for:
nOuterDia - This is the outer diameter of the spool (model uploaded was set at 200mm)
nInnerDia - This is the inner diameter of the spool (model uploaded was set at 89.80mm)
nInnerHeight - This is the height of the spool measured from the inner sides (model uploaded was set at 55mm)
nOuterHeight - This is the height of the spool measured from top to bottom (model uploaded was set at 60mm)
nThickness - This is the thickness of the individual compartment walls (2mm)
nBoltdia - The diameter of the securing pins (model uploaded was set at 5mm)

Important!!! - When changing the parameters, make sure to change in logical order, example, if changing inner diameter to a value larger than the existing outer diameter, ensure to change the outer diameter first else will cause error in fusion 360.

Assembly process:

Print the 4 compartments
Print the securing pins x 8
Print the drill guide (drill guide size changes accordingly to the parameters above, so if you change the parameters above, it may affect the drill guide size)
Place one of the compartment into the spool. Place the drill guide into the handle of the compartment. Use a marker to mark the holes for drilling.
Drill the required holes, then secure the 1st compartment using the securing pins. Depending on machine, you may need to use the drill to drill the holes in the compartment bigger in order to fit the securing pins.
Repeat the step 4 and 5 until all 4 compartments are installed.

Printing the compartments and the securing pins does not require supports. The pins are designed to be printed flat on it's side.

I may work on making it more user-friendly in the future, but for now, this is the simplest version. If you have any suggestions or improvements, please let me know!

Best regards,
nThe Person Who Made This

Visit our website for more information

n另一个纤维材料存储装置

朋友，你觉得上面这个模型，属于下面的哪个分类？