硅胶线轴夹
Silicone wire spool holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Silicone wire spool holder for 19mm spools commonly found on Aliexpress and Ebay.
The spool holder clicks into the spool holder frame and can easily be ejected using the print-in-place ejection button.
Spoolholder frames are supplied for 3-6 spools along with the base units for building a custom spoolholder tray.
All files are supplied in both stl and step format
This thing was designed out of frustration with the #¤"%"#¤! box the silicone wire comes in. It is worse than useless for manageing the wires as they constantly untangle from the spools inside the box.
Hope this will be as usefull for you as it is for me :-)
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:15%
- Notes:
The SpoolHolderFrame should be printer upright with organic/tree support only for the ejection buttons.
Make sure that no support is generated for the ejection handles, to make sure that they release easyly.The SpoolHolder should be printer lying down without any support.
Post-Printing
License
Silicone wire spool holder
by Jesper1266 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Fidget Spinner - 单体打印 / 无需轴承2023-03-26 -
Cubic休息系统 -户外家具2023-05-22 -
俄亥俄州北部大学墙面/桌面装饰标识2024-03-21 -
Hernkyn先锋代表 - 木乃伊探险者（由TheExoticGreeble制作）2024-03-21 -
Gue'Ron'Vesa MK 2 by El Mutanto2024-04-03
最热下载
-
人耳道2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GPD Win3 把手型号2023-04-07 -
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）2024-04-02 -
Hein Gericke Hiprotec 快拍2024-04-03
最新模型
-
龙珠孙悟空，无需支撑2025-07-19 -
弹弓HGX-FRAME V1A2025-07-18 -
鞋撑2025-07-17 -
比基尼模型2025-07-16
