布朗石模块化公寓 HO 模型

BROWNSTONE MODULAR APARTMENTS HO SCALE

2024-04-19 04:16:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These 2 BROWNSTONE APARTMENTS in HO scale are designed to be modular so you can stack each floor for the desired height. They are intended to be used as structure background flats. I have included three different window designs and three different doors. The basement level can be used full height to push down into your layout ground or cut off at the ground level. Each different manufacturer of 3D printers varies in how it prints the same file. On this project I found I needed to reduce the windows and doors to 97% in X and Y, but not in Z.

I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish remover) is a wonderful glue. Make a small test for yourself of two pieces of scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on styrene and PLA for years. No sloppy or messy glue to show when finished.

Here's an interesting point for me to bring to your attention. Every model that I have designed is based on real world measurements and therefore each building is interchangeable with other structures. Simply bring the .stl file into any CAD program, even the wonderful TinkerCAD and combine to make a completely new design to 3D print.

If you would like me to design a custom model for you contact me directly at:

garylavart@yahoo.com.

It is totally free but I will post it on Thingiverse for others to print and enjoy.

Happy modeling,

Gary Lavarack - 3Designer