基础电机转换模型

Basic Motor Conversion

2024-04-19 20:01:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I really liked the original design in its simplicity with a realistic looking propeller that worked. I wanted to adapt this simple design to a quick demonstration for my son of basic R/C functionality, without building a complex R/C boat body, this model did the trick, although turning is still manual, it works.

Changes:

I had to shorten the "rubber band" guide to get the DC motor to fit with the top of boat on.
Raised the edge of the boat walls by 2mm.
Extended the propeller shaft the entire length of the rubber band guide to engage the DC motor.
I designed a snap fit housing for a brushed DC motor I had laying around.
I added the STEP files for adjustment to slightly different DC motors and printer tolerances, my Bambu labs printer had a -.22mm dimensional accuracy variance that I accounted for in the motor model (i.e. diameters are .22mm larger than motor spec).

Hope someone finds this useful, this is my first post/contribution!