橙派零3搭配继电器盒

Orange Pi Zero 3 + Relay Box

2024-04-19 22:24:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a case for the OrangePi Zero3, with a relay in the side.
I used an external wifi antenna to make the signal better, a little fan (always around 35ºC) and a relay connected to gpio, to activate external devices (in my case, some LED)
I Used also a female USB por for a little webcam.
To mantain all together just used litle magnets. Diameter is 4x 3mm hight.

I Designed all with 2.5mm metric screws on base, and made just 2 sizes of printed screws also, to keep boards on place...but they are too small, dont work as well as i wanted. Anyway, just placing boards on place is enought to keep them fine.

Easy to print, no matter filament, layer height and infill. Mine is with 0.6 nozzle, 0.24 layer height and 15% infill, in PLA.
When placing together, magnets do their work fine and all stays together firmly.