用于1/2英寸管件的墙壁弯头安装夹具

Mounting fixture for 1/2" pipe fitting wall elbow

2024-04-20 01:03:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

1/2 inch threaded elbow mounting fixtures.

The elbow is placed 5mm below the surface level.

Attention! If you use heat to join pipes (soldering, welding), always remove this holder!

Use this installation procedure: (according to photos)

1 - place fixtures with elbows to their positions
2 - remove the elbows and solder the nearby joints outside the fixtures
3 - screw the elbows back on and finish the rest of the pipes
4 - use a cast to fix the elbows
5 - disassemble the fixture - the elbows are held in place with a cast
6 - now you can finish soldering