战锤40K 噬世者等身链斧模型

Warhammer 40K Chainaxe, Lifesize, World Eaters

2024-04-20 01:17:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are available on my Etsy here: https://www.etsy.com/uk/listing/1702473962/world-eaters-inspired-lifesize-chainaxe
https://www.etsy.com/uk/listing/1716746055/world-eaters-inspired-lifesize-chainaxe If you wanted to purchase a complete one

I also have a video of the making of the painted version you see in the pictures on my Youtube here: https://www.youtube.com/watch?v=4MvUjzK17-Q

Lifesize Warhammer 40K Chainaxe model that I made, Total size is 84cm long and 35cm wide at the head. These files are designed for a larger printer so to print them all in one piece you will need a printer with at least 300x300x300 build volume. I have cut the bigger files up though for smaller printers. full list of parts to print for printer sizes at the bottom of description. If you have a large printer you can print all the parts on one bed.

The files are all orientated how I printed them and I have also included my Cura files with support settings. Although bear in mind these may not work with a different printer, I use a Neptune 3 max. I printed this on a 0.2mm layer height with 10% infill. For the handle of mine I used 28mmx 340mm dowel for strength however I have included a 3D printed handle if you would rather, the 3d printed handle has a hole for an 8mm support rod to run through.

The axe is designed to be taken apart for storage and transport should you wish so the Axe head and handle can separate. They are held together with a pin that has holes for 3mmx4mm magnets.

The files have tolerance designed in so should fit together straight off the build plate but that does depend on the tolerance of your printer.

Parts to Print based on printer size:

Large Printers: