油桶延伸装置

Barrel Extenders

2024-04-20 13:03:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3 Barrel extenders for airsoft rifles in 3 different lengths

200 mm (20 cm)
100 mm (10 cm)
50 mm (5 cm)

i originally came up with the barrel extenders due to having to space out a mock suppressor away from the hand guard on my airsoft rifle because the suppressor is too big to fit inside the handguard where the barrel threads sit

comes with a slot for a wrench to tighten (don't actually do that too tight it is still plastic)

a 3 mm hole for a cross recessed set screw down at the barrel

the threads are 14 mm CCW,
ISO METRIC PROFILE 14 mm (M14x1) Left Hand Direction

upper section inner diameter 9 mm
lower section inner diameter 13 mm
Male thread length 20 - 30 mm (depends on length of the extension)
female thread length 30 mm
outer diameter 250 mm

if you wanted a different thread comment with the exact thread size and designation and i will make a remix with those threads, if a custom length is needed also comment and i will make a custom size as a remix, it is not really that hard to make these in Fusion 360 but i figured i will just do them, i am making these for myself but i upload them eventually any errors, problems will be fixed and my progress will be uploaded so enjoy what i do :)