鱼鹰抑制器

Osprey Suppressor

2024-04-20 16:10:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A replica SilencerCo Osprey Supressor for airsoft (not real)

i know it has baffles yes they might even work but trust me they wont withstand an actual firearm they are too thin and would probably crack under gas pressure from a firearm so do not use on a firearm, on gas blowback there is a slight chance it actually would work due to the fact that the baffles would indeed slow down the gas (CO2) but there are no vents for it to escape so i assume it might be louder instead i am not an expert in these things

this fits any 14 MM CW threads (M14x1) size 14 mm to be exact on what i used on fusion 360

also fits my barrel extenders specifically the 5 cm one but i will end up making a smaller one but ... big but i assumed that every airsoft rifle or maybe the majority would fit standard 14 mm CW threads since i mean all my airsoft guns has those threads if not let me know i will change the threads or you can do so yourself it is not that hard

this was designed based on the actual Osprey Silencer but with a few tweaks to avoid copyright because SilencerCo does not like people replicating their stuff specifically their attachment design which you would see on the back of the suppressor where the piston is on the real thing

dimension are accurate (mostly) 210 mm x 33 mm x 40 mm
wall thickness at major parts is 5 mm baffles are at 3 mm thickness...or 5 i do not really remember i am lazy

feel free to do whatever you want just give credits and yes you can remove the text on the suppressor i just put it there for fun and looks :D