转角窗帘导轨适配器

Curtain rail adapter for angled ceilings

2024-04-22 13:58:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

In some rooms I have the ceiling angled (~12 degrees), and looking around the stores I couldn't find a suitable adapter to mount it on such ceilings.
Therefore I designed this set of adapters, which allows for mounting the rail horizontally, even if the ceiling is inclined.
The adapters are mounted on the ceiling using the two holes, using screws of 4 or 5 mm in diameter. A washer is recommended if the hard of the screw is not flat and wide, to prevent cracking and also make the connection strong.
For the mounting the rail, the design allows for a T-nut for 5mm screws. Of course the design can be adapted for a washer and a regular hex nut, but the T-nut is more flat and allows for strong bounding.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.8
Infill:
10
Filament brand:
Doesn't Matter
Filament color:
Doesn't Matter
Filament material:
PETG
Notes:
For printing these on Creality printer, Cura was configured with an Experimental setting (see the pictures) that creates a curtain around the printed model, keeping the heat inside and prevent corner/edges wrapping.
The walls/top/bottom are having 2.4mm width to create stronger blocks, while the infill is just 10%.
The head on the printer was changed with 0.8, for faster prints on Creality.

Post-Printing

The T-nut was inserted using heat and make the fixation as part of the piece.

How I Designed This

The Sketchup 2017 project file used for making these is available among the files. If there is a need for further adjustments (angles, holes, etc.) feel free to use it!