塑力锁 V2

Plasti-Lock V2

2024-04-22 17:01:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After seeing and trying CDTush's Permi-Locker design I found a few issues with certain cage designs and also found myself wanting something that wouldn't require a drill to remove. Since it would not be a "permanent" fixture, hence the name Plasti-Lock. The design was altered to fit better in most cages and required only a VERY small screwdriver to "lock". This does little for security but eliminates the lock cylinder 'rattle' and would make any plastic cage invisible to metal detectors (not that brass is picked up by them anyways).

Very little post print work should be required. Simply slide one part into the other. It should be a tight fit, but it should also turn with only a small amount of resistance. You may have to twist them a few times to get them "broken in".

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 KE
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100
Filament brand:
Elegoo
Filament color:
Black
Filament material:
PLA+
Notes:
The orignal author used Nylon, and I've tried it with PLA+ and PETG so it should be suitable for any rigid plastic.