CR-6 SE 40mm热端冷风扇增强版加热插座适配器

Strengthened CR-6 SE 40mm hotend cooling fan adapter hot-end with heated inserts

2024-04-23 08:45:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I just picked the STL and made it from scratch as similar as I could. I made it because I liked the design but wanted to add holes for M3 heated inserts, so it is easier to remove the fans without using nuts.

Print it in the position provided with supports. I know the remix is not great, but the original mesh was complex and I made it from the STL, so I made the best I could. Print it in ABS or PETG, DO NOT USE PLA. It might work, but it will get deformed.

Thanks to Sanger_A2 for his remix, he did a great job and the original design is great. If you do not need heated inserts, please print his design.