更好的肩键设计适用于RG405M
Better Shoulder Buttons for RG405M
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Installation guide: https://getbetter.studio/guides/rg405m
Strongly recommend printing in resin and with a well-tuned printer.
The "supported" versions use my custom dense pin supports. They work well for this kind of part, but are very sensitive to exposure time and will come out as a solid blob if it's not right.
Also make sure that your zero level is very good (0+/-0.05mm recommended) or the buttons will jam when you install the back plate or may have issues relating to slop. In this case, it's better to be taller and simply sand down the flat face of the buttons until they all fit. Measuring against nominal with a caliper will help with this.
License
Better Shoulder Buttons for RG405M
by vinitlee is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
猜你喜欢
联系我们
热门推荐
-
可定制像素珠子照片面板2023-03-26 -
FPV 遥控坦克 V2.0 模型2023-03-26 -
拉特瑞吉 V核心 3.1版电机笼修剪模型2023-05-08 -
工艺机器人加强版工具架固定装置2024-03-31 -
Yoda的抉择2024-04-21
最热下载
-
人耳道2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
30.5mm到25mm转换板（用于飞行控制器堆叠结构）2023-04-03 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
弹弓HGX-FRAME V1A2025-07-18 -
泡泡底拖鞋2025-07-17 -
关节活动人，假人13,Dummy 132025-07-02